泡沫铝合金镀镍工艺研究

本文研究了在高硅铸铝制备的泡沫铝合金样品上镀镍工艺，提出了一种确定泡沫铝合金表面积的方法。讨论了主盐、还原剂、络合剂、缓冲剂等配方主要成份和ｐＨ 值、温度等工艺条件对化学镀镍的沉积速度和镀层质量的影响，优化了前处理方法，从而得到了适合于泡沫铝合金的镀镍工艺。     

航空航天智能材料与智能结构研究进展

智能材料作为新兴多功能材料,能够实现结构功能化、功能多样化。智能结构是在结构中集成智能材料作为传感器和驱动器,使结构除了具有承载、传力、连接等功能外,还具有自感知、自诊断、自驱动、自修复等能力,以更好地适应外界环境的变化,可显著提升航空航天架构的性能。目前智能材料与智能结构已成为航空航天架构减重增效研究的重点。根据国内外智能材料和结构的研究进展,综述了压电材料、铁磁材料、形状记忆材料、智能复合材料等智能材料的发展;讨论了智能结构的研究及应用前景,包括自诊断智能结构、自修复智能结构和减振降噪智能结构;最后,指出了智能材料与结构当前面临的一些挑战性问题,展望了其在航空航天领域的应用前景。     

关于飞机结冰的多重安全边界问题

边界保护是保障飞机安全性的重要方面,对目前国内外飞机结冰安全边界问题的研究现状及进展进行了综述,对飞机结冰致灾物理链路的影响因素及规律进行了分析,指出目前从飞行力学角度出发的安全边界尚未全面考虑飞机结冰致灾复杂物理现象的相关因素,并提出了飞机结冰多重安全边界的概念,将飞机结冰的安全边界分为气象边界、冰形边界和飞行安全边界。结合相应的物理规律和实际应用,按照飞机结冰导致性能恶化的影响程度、飞行操纵影响程度等对边界又进行了多重属性划分。进一步梳理了多重安全边界研究需解决的主要关键问题,提出了下一步的相关研究方向,可为飞机设计、适航认证、飞行操纵、航路规划、分级优化保护等方面的应用提供支撑和参考。     

飞机结冰冰形测量方法研究进展

不同气象环境下飞机部件的结冰外形是飞机结冰研究不可缺少的内容,它对开展结冰气动分析、结冰防护设计、结冰飞行操作和结冰适航取证等研究具有重要意义。结合国内外冰形测量技术发展现状,从接触测量方法和非接触测量方法两个方面分别介绍了现有冰形测量技术的操作流程及测量原理,系统分析总结了各自存在的优缺点。在此基础上,结合飞机结冰和结冰风洞试验的特点,归纳了冰形测量技术下一步发展面临的挑战,包括全类型结冰的精确测量、结冰全貌三维测量和结冰生长过程实时测量等,同时,从基础测量手段与数值计算融合发展的角度,展望了冰形测量方法未来的发展趋势。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

萧山国际商务中心风载风洞试验研究

本文介绍了杭州萧山国际商务中心双塔楼的表面风压风洞试验及主要试验结果,分析讨论了该双塔楼沿高度变化的体型系数、对结构的顺风向、横风向风载以及扭矩,为整体结构和表面玻璃幕墙设计提供了合理的风载荷参数.     

结构比强度及其在优化设计中的应用

本文从结构重量角度推导了比强度(含比模量)表达式,分析了对同一材料不同比强度的关系,给出了比强度在结构动态分析中及结构优化设计中的应用。     

Optimization of entry-vehicle shapes during conceptual design

During the conceptual design of a re-entry vehicle, the vehicle shape and geometry can be varied and its impact on performance can be evaluated. In this study, the shape optimization of two classes of vehicles has been studied: a capsule and a winged vehicle. Their aerodynamic characteristics were analyzed using local-inclination methods, automatically selected per vehicle segment. Entry trajectories down to Mach 3 were calculated assuming trimmed conditions. For the winged vehicle, which has both a body flap and elevons, a guidance algorithm to track a reference heat-rate was used. Multi-objective particle swarm optimization was used to optimize the shape using objectives related to mass, volume and range. The optimizations show a large variation in vehicle performance over the explored parameter space. Areas of very strong non-linearity are observed in the direct neighborhood of the two-dimensional Pareto fronts. This indicates the need for robust exploration of the influence of vehicle shapes on system performance during engineering trade-offs, which are performed during conceptual design. A number of important aspects of the influence of vehicle behavior on the Pareto fronts are observed and discussed. There is a nearly complete convergence to narrow-wing solutions for the winged vehicle. Also, it is found that imposing pitch-stability for the winged vehicle at all angles of attack results in vehicle shapes which require upward control surface deflections during the majority of the entry.     

国内外航天器密封舱主结构材料的选用

介绍了国内外航天器密封舱主结构常用的铝合金材料,并对其常规力学性能、断裂韧度、焊接性能、抗应力腐蚀性能等进行了比较。同时,结合不同的使用环境及条件对可选材料进行了分析,给出了目前及未来密封舱主结构材料的选择建议。文章研究结果可为大型航天器密封舱主结构研制提供参考。     

铝合金含硅量的测定方法

Ｎ２Ｏ－Ｃ２Ｈ２原子吸收光谱法测定卫星系统电池外壳铝合金中的硅含量。讨论了燃烧器高度、燃助比、共振线等测定条件的选择方法，以及酸度、温度和Ｎ２Ｏ－Ｃ２Ｈ２火焰区对测定精度的影响。实际应用证明，该方法灵敏度高，干扰小，选择性和重复性好，并具有操作简便，易掌握，分析周期短等特点；精密度和准确度均能满足卫星系统电池外壳体研制的要求。